Q. Does it matter if the water goes through the Blue or white side of your Classic Filter Pad first?
A. Our Classic Filter pads are designed to flow and filter water exactly the same through either side. It comes down to personal preference if you like the white or blue side up.
Q. How often should I change my aquarium filter pad?
A. Most hobbyists rinse the filter pad every two weeks and replace them monthly during a water change. The more often you change filter pads the better your water quality; filter pads remove organic solids before they have a chance to further break down.
Q. Can I clean and reuse the Classic Bonded Filter Pads?
A. Our durable Classic Filter Pads can be rinsed and reused. The method to clean the pad is determined by how it is used. A typical filter pad is used as mechanical pre-filter material which means its only purpose is to capture floating debris from the water. In this case, clean the pad by rinsing it in freshwater while squeezing it out a few times. Some hobbyists use filter pads as part of their biological filter. They use the pad surface area to grow beneficial bacteria which breaks down fish waste, uneaten food, etc. To keep the good bacteria alive the pad must be rinsed in fresh or saltwater where the chlorine or chloramines have been treated. Another method is to clean the pad in a bucket of old tank water. Either way, just rinse and squeeze the pad a few times to remove trapped debris.
Q. I have a pad that was compressed in shipping. Is there a way to return it to its normal height?
A. A hair dryer can be used to soften the resin and it will return to its normal state.
Q. I have used filter pads where the dye comes off the pad and goes into my aquarium. Will the dye come off your Classic Filter Pads?
A. We add our blue pigment to our special binding resin and this keeps the color on the pad and out of your aquarium water longer than other filter media pads.